aquasure logo
FREE UK Delivery

Aquasure Twin Pack Wetsuit Repair Adhesive

Sorry this item is currently out of stock
Two 7 gram Tubes of Aquasure Urethane Repair Adhesive & Sealant


Product SKU: 007725

Barcode: 021563111460


The worldwide industry standard for permanent, maxi- mum strength repairs to wet or dry suits and many other types of water sports products including inflatable’s etc.


Flexible urethane formula waterproofs, seals and also protects against abrasion.



Clean damaged area with Cotol-240T Cure Accelerator/Precleaner or solvent (paint thinner, nail polish remover or similar). Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned.


Apply Aquaseal? to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces. Most repairs reach full strength overnight (10-14 hours).

Allow longer for thickest repairs.


HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4'' beyond edge with Aquaseal. Remove tape after full cure.


SEAMS: Apply 1/16'' thick bead overlapping seams edges by at least 1/4''. Apply with slight pressure to saturate fabric surfaces. HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.



FULLY CURED AQUASURE IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1/2 hour after applying.


CLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol. STORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer.

To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes.

Customer Reviews

Rated Average 0/5.0 0/5.0 stars - 0 reviews    
To help prevent automated spam, please answer the following question.

Which colour wine, white, rose or...  

This is the basket Message

This is the basket Message